+Plushies+ Dragon Pattern pg02

Intended for 8.5"x11" Paper

Page 01: [link]

If you use this pattern, send me pictures of the finished result! ^_^

This is intended to be a blank slate plushie pattern. Meaning you can add on whatever horns/spikes/other fancy shapes or markings so you can make something unique c:

I provided the patterns for the heads of both the Stardust and Red Dragon Archfiend plushies to give y'all some variety~

[] For head assembly, I recommend completely hand-sewing it, starting at the base of the neck and going on to the muzzle.

[] to attatch the head to the body, I sewed the top base of the head to the top base of the neck on the completely sewn-together body before turning everything right-side out. I stuffed the body and the head from the hole in the neck and sewed it up afterwards. Makes for a nice clean look.

[] It is possible to machine sew the back and belly to the body pieces if you're careful. I recommend stay stitching around the neck and middle so that it doesn't move too much, for the belly piece especially.

[] I didn't stuff the feet. you may want to put interfacing or foam inside the feet for a bit a stabilization (the dragons I made lean back on their tails rather than truly standing)


If you have anymore questions, I'll try to answer them and add them to this list~